D-Link DES-3250TG - Manual (Page 64)

D-Link DES-3250TG Standalone Layer 2 Switch
Figure 7- 19. Static Multicast Forwarding Settings window
To add a new multicast MAC address to the switch’s forwarding table, click the Add button:
Figure 7- 20. Setup Static Multicast Forwarding Table window
The following fields can be set:
Parameter Description
VID Allows the entry of the VLAN ID of the
VLAN the MAC address below is a member
of.
Multicast MAC Address Allows the entry of the multicast MAC
address of an end station that will be entered
into the switch’s static forwarding table.
Port Select the port number on which the MAC
address entered above resides.
None Specifies the port as being none.
Egress Specifies the port as being a source of
multicast packets originating from the MAC
address specified above.
54