D-Link DES-3250TG - Manual (Page 115)

D-Link DES-3250TG Standalone Layer 2 Switch
.
Figure 7- 66. Second 802.1X Authenticator Settings window
Configure the following 802.1x port settings:
Parameter Description
Port Port being configured for 802.1x settings.
AdmDir From the pull-down menu, select
whether a controlled Port that is
unauthorized will exert control over
communication in both receiving and
transmitting directions, or just the
receiving direction.
Ctl Stat This displays whether a controlled Port
that is unauthorized will exert control
over communication in both receiving
and transmitting directions, or just the
receiving direction.
PortControl From the pull-down menu, select
forceAuthorized, forceUnauthorized or
auto
− Force Authorized forces the
Authenticator of the port to become
Authorized. Force Unauthorized forces
the port to become Unauthorized.
TxPeriod Select the time to wait for a response
from a supplicant (user) to send EAP
Request/Identity packets.
QuietPeriod Select the time interval between
authentication failure and the start of a
new authentication attempt.
105