D-Link DES-3250TG - Manual (Page 133)

D-Link DES-3250TG Standalone Layer 2 Switch
Figure 9- 1 CPU Utilization window
To select a port to view these statistics for, first select the Switch in the switch stack by using the Unit pull-down menu. To
view the CPU utilization by port, use the real-time graphic of the Switch and/or switch stack at the top of the web page by
simply clicking on a port. Click Apply to implement the configured settings. The window will automatically refresh with new
updated statistics.
The information is described as follows:
Parameters Description
Time Interval [1s ] Select the desired setting between 1s and
60s, where "s" stands for seconds. The
default value is one second.
Record Number [200] Select number of times the Switch will be
polled between 20 and 200. The default
value is 200.
Utilization Check whether or not to display Utilization.
Port Utilization
The Utilization window shows the percentage of the total available bandwidth being used on the port.
To view port utilization, click on the Monitoring folder and then the Port Utilization link:
123