First time connecting to the switch – D-Link DES-3250TG User Manual

Page 29

Text mode
Original mode

D-Link DES-3250TG Standalone Layer 2 Switch

Figure 5- 1. Initial screen after first connection

First Time Connecting to The Switch

The Switch supports user-based security that can allow you to prevent unauthorized users from accessing the Switch or
changing its settings. This section tells how to log onto the Switch.

NOTE: The passwords used to access the Switch are case-sensitive;
therefore, "S" is not the same as "s."

When you first connect to the Switch, you will be presented with the first login screen (shown below).

NOTE: Press Ctrl+R to refresh the screen. This command can be used at any
time to force the console program in the Switch to refresh the console screen.