D-Link DES-3250TG - Manual (Page 100)

D-Link DES-3250TG Standalone Layer 2 Switch
VLAN Name Allows the entry of a name for a
previously configured VLAN.
Source IP Source IP Address - Enter an IP Address
mask for the source IP address.
Destination IP Destination IP Address- Enter an IP
Address mask for the destination IP
address.
Dscp (0-63) Destination IP Address- Enter an IP
Address mask for the destination IP
address.
Protocol This field allows the user to modify the
protocol used to configure the Access
Rule Table; depending on which
protocol the user has chosen in the
Access Profile Table.
To view the settings of a previously correctly configured rule, click in the Access Rule Table to view the following
screen:
Figure 7- 48. Access Rule Display window (IP)
Ethernet
To configure the Access Rule for Ethernet, open the Access Profile Table and click Modify for an Ethernet entry. This will
open the following screen:
90