D-Link DES-3250TG - Manual (Page 105)

D-Link DES-3250TG Standalone Layer 2 Switch
forwarded by the Switch, according to
any additional rule added (see below).
Access ID Type in a unique identifier number for
this access. This value can be set from 1
- 50.
Type Selected profile based on Ethernet (MAC
Address), IP address or Packet Content
Mask.
Ethernet instructs the Switch to examine
the layer 2 part of each packet header.
IP instructs the Switch to examine the IP
address in each frame's header.
Packet Content Mask instructs the
Switch to examine the packet header.
Offset This field will instruct the Switch to mask
the packet header beginning with the
offset value specified:
value (0-15) - Enter a value in hex form
to mask the packet from the beginning of
the packet to the 15th byte.
value (16-31) - Enter a value in hex form
to mask the packet from byte 16 to byte
31.
value (32-47) - Enter a value in hex form
to mask the packet from byte 32 to byte
47.
value (48-63) - Enter a value in hex form
to mask the packet from byte 48 to byte
63.
value (64-79) - Enter a value in hex form
to mask the packet from byte 64 to byte
79.
To view the settings of a previously correctly configured rule, click in the Access Rule Table to view the following
screen:
95