D-Link DES-3250TG - Manual (Page 130)

D-Link DES-3250TG Standalone Layer 2 Switch
managers access to MIB objects in the
switch’s SNMP agent.
View Name Type an alphanumeric string of up to 32
characters that is used to identify the group
of MIB objects that a remote SNMP manager
is allowed to access on the switch. The view
name must exist in the SNMP View Table.
Access Right Use the pull-down menu to select the access
right:
Read_Only − Specifies that SNMP
community members using the community
string created with this command can only
read the contents of the MIBs on the switch.
Read_Write − Specifies that SNMP
community members using the community
string created with this command can read
from and write to the contents of the MIBs
on the switch.
SNMP Host Table
Use the SNMP Host Table to set up trap recipients.
Figure 8- 13. SNMP Host Table window
To delete an existing entry, click the selection button in the Delete column on the far right that corresponds to the port you
want to remove. To create a new entry, click the Add button, a separate window will appear.
Figure 8- 14. SNMP Host Table Configuration window
120