D-Link DES-3250TG - Manual (Page 101)

D-Link DES-3250TG Standalone Layer 2 Switch
Figure 7- 49. Access Rule Table (Ethernet)
To remove a previously created rule, select it and click the button. To add a new Access Rule, click the Add button:
Figure 7- 50. Access Rule Configuration window (Ethernet)
To set the Access Rule for Ethernet, adjust the following parameters and click Apply.
Parameter Description
Profile ID This is the identifier number for this
profile set.
Access ID Type in a unique identifier number for
this access. This value can be set from 1
- 50.
Mode Select Permit to specify that the packets
that match the access profile are
91