D-Link DES-3250TG - Manual (Page 63)

D-Link DES-3250TG Standalone Layer 2 Switch
Forwarding Filtering
MAC addresses can be statically entered into the switch’s MAC Address Forwarding Table. These addresses will never age
out.
Unicast Forwarding
To enter a MAC address into the switch’s forwarding table, click on the Forwarding Filtering folder on the Configuration
menu and then click Unicast Forwarding:
Figure 7- 18. Setup Static Unicast Forwarding Table window
The following fields can be set:
Parameter Description
VLAN ID Allows the entry of the VLAN ID of the
VLAN the MAC address below is a member
of
− when editing. Displays the VLAN ID the
currently selected MAC address is a member
of
− when editing an existing entry.
MAC Address Allows the entry of the MAC address of an
end station that will be entered into the
switch’s static forwarding table when adding a
new entry. Displays the currently selected
MAC address when editing.
Allowed to Go Port Allows the selection of the port number on
which the MAC address entered above resides.
Multicast Forwarding
Multicast MAC addresses can be statically entered into the switch’s MAC Address Forwarding Table. These addresses will
never age out.
To enter a Multicast MAC address into the switch’s forwarding table, click on the Forwarding Filtering folder on the
Configuration menu and then click Multicast Forwarding:
53