D-Link DES-3250TG - Manual (Page 129)

D-Link DES-3250TG Standalone Layer 2 Switch
SNMP manager.
AuthNoPriv − Specifies that authorization
will be required, but there will be no
encryption of packets sent between the
switch and a remote SNMP manager.
AuthPriv − Specifies that authorization will
be required, and that packets sent between
the switch and a remote SNMP manger will
be encrypted.
SNMP Community Table
Use this table to create an SNMP community string to define the relationship between the SNMP manager and an agent. The
community string acts like a password to permit access to the agent on the switch. One or more of the following characteristics
can be associated with the community string:
• An Access List of IP addresses of SNMP managers that are permitted to use the community string to gain access to
the switch’s SNMP agent.
• An MIB view that defines the subset of all MIB objects that will be accessible to the SNMP community.
• Read/write or read-only level permission for the MIB objects accessible to the SNMP community.
Figure 8- 12. SNMP Community Table Configuration window
To delete an existing entry, click the selection button in the Delete column on the far right that corresponds to the port you
want to configure. To create a new entry, configure the parameters as desired in the top part of the window above and click the
Apply button. This will add the new string to the SNMP Community Table.
Configure the following for the new SNMP Community entry:
Parameter Description
Community Name Type an alphanumeric string of up to 32
characters that is used to identify members of
an SNMP community. This string is used
like a password to give remote SNMP
119