D-Link DES-3250TG - Manual (Page 30)

D-Link DES-3250TG Standalone Layer 2 Switch
Figure 5- 2. Initial screen, first time connecting to the Switch
Usernames and Passwords are not required on the initial screen after the first connection. Any additional user names and
passwords must first be created by the administrator. You will be given access to the command prompt DES-3250TG:4#
shown below:
Figure 5- 3. Command Prompt
NOTE: The first user automatically gets Administrator level
privileges. It is recommended to create at least one Admin-level user
account for the Switch.
Password Protection
The DES-3250TG does not have a default user name and password. One of the first tasks when settings up the Switch is to
create user accounts. If you log in using a predefined administrator-level user name, you have privileged access to the Switch's
management software.
20