Compix GenCG 5.5 - Manual (Page 64)

Chapter 3 Object Design
Document No: 2.3.001 Revision: 1.1 Updated: 4/19/2012
There are 5 pages of color palettes
available in GenCG. Click on the
up and down arrow buttons to view
them.
Color Palette
First select the position to be
changed by clicking on the [Top],
[Both], or [Bottom] button. Select-
ing [Both] will change the top and
bottom colors at the same time. A
color swatch is provided to the right
of the buttons as a preview.
Gradation
Position Color
Change the angle of the object’s
gradient. The angle can be adjusted
from -90 to 90.
Angle
Angle = 0 Angle = 90
Checking the [Bi-Dir] box sandwich-
es the second gradation color be-
tween the first color. It also makes
the width field active. Change the
number in this field to increase or
decrease the width of the center
color.
Bi-Directional
Compix Media GenCG
64