CIRCUTOR DHB Series - Manual (Page 12)

12
5.3. Functions of buttons
- Acceptation button:
⇒ entry in programming mode (hold down ca 3 secondes)
(przytrzymanie przez około 3 sekund),
⇒ moving through the menu – choice of level,
⇒ moving through the menu monitoring the measured values,
⇒ entry in the mode changing the parameter value,
⇒ acceptation of the changed parameter value.
- Button increasing the value:
⇒ display of maximal value,
⇒ display of maximal value – menu monitoring the measured
parameters,
⇒ entry in the level of the parameter group,
⇒ moving through the chosen level,
⇒ change of the chosen parameter value – increasing the value.
- Button to change the digit:
⇒ display of minimal value,
⇒ display of minimal value – menu monitoring the measured
parameters,
⇒ entry in the level of parameter group,
⇒ moving through the chosen level,
⇒ change of chosen parameter value – shift on the next digit,
⇒ next parameter in the monitoring mode of meter parameters.
- resignation button:
⇒ entry in the menu monitoring the meter parameters (holding down
ca 3 seconds),
⇒ exit from the menu monitoring meter parameters and measured
values,