CIRCUTOR CIReQ - Manual (Page 29)

_______________________________________________________
_________________________________________________________________________________________________________
CIR-eQ User’s Manual 29 of 36
To modify the password used to access the Web page, enter a new password in the
“New Password” field and confirm it in the “Repeat new password” field. Press the
“Modify” button after entering the new password. The new password will be saved.
8.2.1.3.- Generate XCG file
As explained in section 8.2 Downloading the XCG identification file, this sub-menu
generates the file that identifies the user and his information and the sending address to
the CIR-e³Web application. Click on “Download application file” to download the file.
8.2.1.4.- Downloads
The download sub-menu can be used to download the CIR-e.exe application file to
configure CIR-eQ and the unit's manual. The unit configuration application and the
complete manual are included in the SD card supplied with the unit. In any case, they are
available in this section of the Web page as backup if the user deletes any of the files by
mistake.
The screen shows the different download options.
To download any option, select it and click on “link”.