CIRCUTOR CIReQ - Manual (Page 14)

_____________________________________________
_________________________________________________________________________________________________________
14 of 36 CIR-eQ User’s Manual
6.1.1.- GENERATING THE SETUP FILE
To generate the setup file, run the CIR-e.exe application located in the root directory of
the SD card.
In the event that the SD card format from which the application is running is not a FAT16
format, the executable warns the user of an incorrect format using the following window:
The application determines the installation parameters that will determine how the CIR-
eQ takes the measurements and records the parameters. These parameters are stored
in the SD memory card. The setup application generates a file that must be stored in the
SD card and which is named after the unit's serial number and has the xst extension. If
the setup application is not available, you can also download it from http://cir-
e3.circutor.com , in menu “User information”.
When you run the application for the first time, the window will appear blank, as shown
on the figure.
6.1.2.- MENU OPTIONS.
The application has 4 different function buttons. “Config”, “Connect” “Exit” and “Send to
Web”.
6.1.2.1.-
Select the configure option to create a
new file with the installation's features for a
CIR-e³. The following window will be displayed when you click on “Configure”. requested
the serial number of the device to display the configuration menu that corresponds to that
model of device. The window displayed is:
Configure