Environmental and other features, Installation and commissioning, Cir-eq configuration – CIRCUTOR CIReQ User Manual
Page 13
_______________________________________________________
_________________________________________________________________________________________________________
CIR-eQ User’s Manual
13 of 36
5.1.- ENVIRONMENTAL AND OTHER FEATURES
Environmental Work Conditions
Temperature
-10…50 ºC
Altitude
2.000 m
Humidity
95% RH non-condensing
Others
Storage temperature
-15…65 ºC
Degree of protection
IP 53
Weight (only CIR-eQ)
0,657 kg
Weight (with packaging)
0,713 kg
This manual contains information and warnings that must be observed at all times to
guarantee the safe operation of the unit and maintain it in perfect working conditions.
When you suspect an operational fault in the unit's protection system (for example,
visible damage), disconnect the unit from any voltage or current source and contact a
qualified service representative or the after sales service of
CIRCUTOR, SA.
Anyone installing or using the equipment must follow the safety measures set
forth and all warnings indicated in this instruction manual to guarantee a safe
operation.
6.- INSTALLATION AND COMMISSIONING
If the battery is discharged when the team loses and records are made with
the default date 01/01/2011 00:00 It is recommended to check the time of the
device before making a record and, after long period of inactivity, connect the
device 12 hours to charge the battery.
CIR-eQ is a portable analyzer that is easy to install and use. It has been designed to
facilitate the work of the companies and/or persons that wish to perform quality network
audits.
The unit is configured from the PC with the SD card supplied with the unit. Make sure
that all voltage connections are correct so that the unit is ready to take measurements
and record data.
Please follow these steps to configure, install and commission the unit.
6.1.- CIR-EQ CONFIGURATION
CIR-eQ analyzer does not have configuration buttons or a setup screen and it needs a
file with the configuration information required to register the data. This file has the xst
extension and it is generated with the CIR-e.exe application. This application is supplied
with the unit and is stored in the SD card. And you can download the latest version from
Web page of CIR-e
inside “User information” menu.