CIRCUTOR AR6 Series - Manual (Page 44)

AR6 portable network analyzer
Page 44 of 69 User Manual
13.1.1 VIEW maximum or minimum values option (consumed or generated)
There are three basic display models that are selected in the dynamic VIEW menu:
Instantaneous, Maximum and Minimum. If either the Maximum or Minimum option is selected in
the VIEW menu, the screen in Fig.13-2 will appear. In the Powers section, the user can see
Maximum or Minimum values of generated or consumed power. Use the ▼/ ▲ buttons to
toggle between the value, the date and the time at which the maximum or minimum values
occurred. Power consumed is indicated with a red arrow
 and power generated by a green
arrow .
Viewed parameters:
•
Phase-neutral voltage, Vpn
•
Phase-phase voltage, Vpp
•
Current, A
•
Active power, kW
•
Reactive power, kvarL
•
Reactive power, kvarC
•
Apparent power, kVA
•
Power factor, PF
•
Cos phi angle
ϕ
•
Frequency
Fig.13-2.- Example of a maximum values consumed screen
13.2 POWER QUALITY SCREEN
On this screen the parameters most relevant to the quality of the measured network are
displayed
Displayed parameters:
•
Instantaneous flicker (WA)
•
PST Flicker
•
Crest factor
•
K-Factor
•
THD V, THD V odd, THD V even
•
THD A, THD A odd, THD A even
•
Imbalance V, A
•
Asymmetry V, A
Fig.13-3.- Example of instantaneous power quality display
The dynamic menu options for this screen are the same as those indicated in the beginning of
section 0.
13.2.1 VIEW quality maximum or minimum values option
Displays the maximum or minimum values (according to selection) of the quality parameters.
Use the
▼/ ▲ buttons to toggle between these values. For each case, the date and the time at
which the maximum or minimum values occurred is displayed.
The dynamic menu options for this screen are the same as those indicated in the beginning of
section 0.