CIRCUTOR AR6 Series - Manual (Page 19)

AR6 portable network analyzer
User Manual Page 19 of 69
1.) Remove the screw from the battery cover.
2.) Lift the cover to make the battery compartment accessible.
3.) Insert the battery cables and connector in the receptacle
indicated for the battery. Make sure that the connector is
positioned correctly, and do not force it.
4.) Once the battery is connected to the unit, position it so that the
power supply cables are not stretched, compressed, and will not
be damaged by the cover.
5.) Install the cover after verifying that none of the cables have
been damaged and that the battery is firmly in place.
6.) Lock down the cover again with the screw
Fig.5-1.- Steps to insert / replace the battery