CIRCUTOR AR6 Series - Manual (Page 26)

AR6 portable network analyzer
Page 26 of 69 User Manual
If "Details" is selected, the unit indicates a PC tool to format the unit's SD card and the
configuration that should be used. (see section 9.1.3 )
9.1.3 Format SD with a PC program
This action should be performed if problems are detected when accessing
the SD memory. The indicated tool is used to restore the card with its factory-
installed values and partitions, recovering the areas with access or write
problems (corrupt areas).
The recommended tool to format the SD card is "SD Formatter", available
at
www.sdcard.org/downloads ” with the following options activated:
Format Type: Full (OverWrite)
Format Size Adjustment On
10 MEASUREMENT MANAGER MENU
The measurement administrator screen allows the user to create standard
templates in order to configure the unit simply and rapidly for data
acquisition and recording. To start this menu, select the icon in the figure at
the left and click the ENTER button ,

Fig. 10-1.- List of measurements
The screen displays a list of the various
measurement files created on the unit. Only one of
these measurements may be active at any given
moment. The figure shows a list of measurements as
an example; "test" appears marked with a square
with a dot in it, indicating that this is the active
measurement.
One measurement allows configuration of the
analyzer for measuring and logging in a specific
installation.
The options for the dynamic ACTIONS button on this screen are:
Button Function Description
Main Menu Brings up the main menu
The options of this menu are to create new
measurement files, modify existing ones, delete
(clean) files associated with an already existing
measurements or the files of all the existing
measurements, permanently delete a measurement
or activate it. They are all explained in more detail
below