Casella CEL CEL-440 - Manual (Page 48)

Operation Press Display Shows Comments
12. Inspect
stored
narrow
band data
This screen shows the
scanned spectrum from the
selected narrow band run.
Use to display the other
parameters from the
selected run.
Press then use
and to scan the
band levels manually.
Press to cancel.
When CEL-480 data is being
inspected and more than
one scan is included, press
and to display data
from the other scans.
4.3 Delete Stored Data
Unwanted data stored in the instrument can be deleted to make room
for new data. Proceed as follows.
Operation Press Display Shows Comments
1. Start from
the Main
menu
This is the Main menu.
It gives access to further
menus that select:
Measurement Mode,
Measurement Setup,
Calibration Sequence,
Data Recall from Memory,
Instrument Configuration.
2. Select the
Memory
option
or
Move the reverse video
cursor to the required line.
r-10
8k 2k 500 125 32
20
40
60
80
L
A Z
ZF
11:ØØ:22 ØØØ5
Calibration
Memory
r-01
Measure Mode Measure Mode
Setup
1/6
Calibration
r-02
Measure Mode
Setup
Memory
4/6
Page 48 - CEL-440/480 Operators Handbook
Operation