Dimplex BLF50 - Manual (Page 17)

17
Fireplace Installation
Figure 17
Tab
Figure 16
Hooks (4)
Mounts (4)
fireplace (4) (Figure 16).
Use the supplied two (2)
3.
Phillips sheet metal screws
to fasten the glass assembly
tabs to the fireplace (Figure
17).
Ensure the fireplace's on/off
4.
switch is switched to the off
position (refer to operation
section).
If unit is not hard-wired, plug
5.
fireplace into a 15 Amp, 120
volt outlet (refer to noTE 1).