Altera Cyclone III FPGA Starter Board - Manual (Page 31)

Altera Corporation Info-i
April 2012 Preliminary
Additional Information
Revision History The table below displays the revision history for the chapters in this
reference manual.
How to Contact
Altera For the most up-to-date information about Altera products, refer to the
following table.
Chapter Date Version Changes Made
2 April 2012 1.4 ● Updated description for JP8 board jumper in Table 2–5 .
2 July 2010 1.3 ● Updated manufacturer part number for Table 2–11.
All March 2010 1.2 ● Updated DDR notes description in the board-specific
LED and DDR SRAM pinout tables.
● Corrected jumper operational descriptions for JP8 in
Table 2–5.
● Corrected column heading to “Maximum Power” in
Table 2–7.
● Updated parallel flash manufacturing information in
memory section.
● Moved front matter to back.
All June 2008 1.1 ● Updated starter kit install path directory.
● Updated FPGA pins in clock pinout table and figure.
● Updated FTDI part number in USB interface section.
● Added DDR notes in the board-specific LED and DDR
SRAM pinout sections.
All April 2007 1.0 ● First publication.
Contact Note (1)
Contact
Method Address
Technical support Website www.altera.com/support
Technical training Website www.altera.com/training
Email [email protected]
Product literature Website www.altera.com/literature
Non-technical support (General) Email [email protected]
(Software Licensing) Email [email protected]
Note to Table:
(1) You can also contact your local Altera sales office or sales representative.