Important considerations – Altera MAX II User Manual
Page 10
2–2
Development Kit Version 1.1.0
Altera Corporation
MAX II Development Kit Getting Started User Guide
July 2005
Installing the MegaCore Function & Reference Designs/Demos
■
Altera recommends that you install the software that is on the
MAX II Development Kit CD-ROM. See
Function & Reference Designs/Demos”
■
Quartus II software version 4.1 SP1 or later. See
Important Considerations
You need your network identification card (NIC) ID for licensing the
Quartus II software.
Your NIC number is a 12-digit hexadecimal number that identifies the
Windows NT workstation that serves Quartus II licenses. Networked (or
floating node) licensing requires an NIC number or server host ID. When
obtaining a license file for network licensing, you should use the NIC
number from the PC that will issue the Quartus II licenses to distributed
users over a network. You can find the NIC number for your card by
typing ipconfig /all at a command prompt. Your NIC number is the
number on the physical address line, without the dashes.
You need administrative privileges to install the required software.
Installing the
MegaCore
Function &
Reference
Designs/Demos
To install the MegaCore
®
functions and reference designs, insert the
MAX II Development Kit CD-ROM into your CD-ROM drive. Copy the
files to your hard drive.
1
The pci_t32 MegaCore function installer is available in the
PCI_ReferenceDesign/PCI_Megacore_Installer
directory. To
take advantage of the evaluation version of this MegaCore,
install it in the directory of your choice.
shows the directory structure.