Altera Cyclone V GX FPGA - Manual (Page 24)

6–8 Chapter 6: Board Test System
Using the Board Test System
Cyclone V GX FPGA Development Kit October 2012 Altera Corporation
User Guide
Random Test
Starts a random data pattern test to flash memory, which is limited to a scratch page in
the upper 128K block.
CFI Query
The CFI Query control updates the memory table, displaying the CFI ROM table
contents from the flash device.
Increment Test
Starts an incrementing data pattern test to flash memory, which is limited to a scratch
page in the upper 128K block.
Reset
The Reset control executes the flash device’s reset command and updates the memory
table displayed on the Flash tab.
Erase
Erases flash memory, which is limited to a scratch page in the upper 128K block.
Data Display/Entry Boxes
There are 8 rows and 4 columns. Each column contain 8 hexadecimal numbers. After
entering the numbers in each cell, press Enter on your keyboard. Then click Write and
Read
button.
Flash Memory Map
Displays the flash memory map for the Cyclone V GX FPGA Development Kit.