beautypg.com

Stackup data, Stackup stub, Full stackup – Altera Device-Specific Power Delivery Network User Manual

Page 14

background image

Figure 7: Stackup Tab

Stackup Data

The Stackup Data section is where you enter board dimension data and other parameters, such as board

stackup settings, power via, and dielectric material.

Stackup Stub

The content in this section is updated based on the settings in Stackup Configuration, in the Stackup

Data section. Enter the thickness of the metal/dielectric material for each layer. The stackup shown in this

section is used as the basic unit to construct the complete PCB stackup.

Full Stackup

This section lists the complete stackup of your board. You can modify content in the section to better

match your board design. The last column in the section is the PWR plane types. In a single rail analysis

case, assign the layer where the power rail is located as target, and the ground layer that the power rail

refers to as reference.

14

Stackup Data

UG-01157

2015.03.06

Altera Corporation

Device-Specific Power Delivery Network (PDN) Tool 2.0 User Guide

Send Feedback