Pilz PSSu E S 2DOR 2 - Manual (Page 18)

4.2 Configuration
4 Function description
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-2
4.2 Configuration 4200 Configuration 4- ][Funktionsbeschreibung_BA Konfig ST-Aus
It is not necessary to configure ST outputs in the PSSuniversal Configu-
rator on the PSS WIN-PRO system software, but ST modules can be se-
lected and displayed.
The ST process image can be optimised by combining adjacent bits of
the same type into bytes.
Further information on configuration is available in the PSSuniversal
Configurator's online help.
4.2.1 Addresses in the process image
Addresses in the process image 4- ][Funktionsbeschreibung_BA PA 2 x ST-Aus
The module occupies 2 consecutive bit addresses in the process image.
Configuration SafetyBUS p Standard bus system
FS-PIO ST-PII ST-PIO
None - - - - - - 2 Bit