Pilz PSSu H FS SN SD - Manual (Page 9)

Safety
Operating Manual PSSu H FS SN SD(­T)(­R)
1001451­EN­08 9
3 Safety
3.1 Intended use
The module is suitable for use in safety and non­safety­related applications with
SafetyNET p.
The modules PSSu H FS SN SD and PSSu H FS SN SD­T may be used as a safety com­
ponent in accordance with the Lifts Directive 95/16/EC, EN 81­1, EN 81­2 and EN 115­1.
The programmable safety system should be installed in a protected environment that meets
at least the requirements of pollution degree 2. Example: Protected inside space or control
cabinet with protection class IP54 and corresponding air conditioning.
The module PSSu H FS SN SD­T is suitable for use where there are increased environ­
mental requirements (see Technical Details).
The module PSSu H FS SN SD­R is suitable for use where there are increased environ­
mental requirements demanded by railway applications (see Technical Details).
Intended use includes making the electrical installation EMC­compliant. Please refer to the
guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use
in an industrial environment. It is not suitable for use in a domestic environment, as this can
lead to interference.
The following is deemed improper use in particular:
} Any component, technical or electrical modification to the module
} Use of the module outside the areas described in this manual
} Any use of the module that is not in accordance with the technical details.
3.2 Safety regulations
3.2.1 Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is someone who, because of their training, experience and current pro­
fessional activity, has the specialist knowledge required to test, assess and operate the
work equipment, devices, systems, plant and machinery in accordance with the general
standards and guidelines for safety technology.
It is the company’s responsibility only to employ personnel who:
} Are familiar with the basic regulations concerning health and safety / accident preven­
tion
} Have read and understood the information provided in this description under "Safety"
} And have a good knowledge of the generic and specialist standards applicable to the
specific application.
3.2.2 Warranty and liability
All claims to warranty and liability will be rendered invalid if
} The product was used contrary to the purpose for which it is intended