Pilz MM A MINI-IO-CAB01 2.5M - Manual (Page 3)

MM A MINI­IO­CAB01
Operating Manual MM A MINI­IO­CAB01
1003125­EN­02 3
Description
The connection cables MM A MINI­IO­CAB01 are used to connect an incremental encoder
or adapter to the speed monitors PNOZ m EF 1MM or PNOZ m EF 2MM.
The connection to the speed monitor is made via the Mini­IO connector. The signals and
the braided shield for connecting the incremental encoder or adapter feature wires with
crimp connectors. The cable cores are labelled.
CAUTION!
Communication errors may occur if the adapter cable is too long or there
are any external sources of interference. Use an adapter cable that’s less
than 5 ;m in length. Lay the adapter cable separately from any potential
sources of interference, such as drive cables leading to the motor, for ex­
ample.
Connector pin assignment
1 (5V)
2 (0V)
3 (Z)
4 (A)
5 (A)
6 (Z)
7 (B)
8 (B)
orange
white/green
blue
white/blue
green
white/brown
brown
white/orange
colour coding