Crosscut fence setup - vertical – Woodhaven 4965: Super Sled User Manual
Page 7
USING THE SUPER SLED FOR CROSSCUTS
After setting the Fence angle, place the work on the Sled Base, butted against the Fence and the Flip Stop. Slide the
Outboard Clamp Brackets/Toggle Clamps against the opposite side of the work. Tighten the Outboard Clamp Brackets to the
Sled Base, then tighten the Toggle Clamps on the work using medium pressure. Do not over tighten! Make the cut, being sure
that the work is not touching the blade before starting the cut.
8
6
Crosscut Fence Setup - Vertical
See also other documents in the category Woodhaven Tools:
- Router Plate and Table (4 pages)
- 202-203: Router Fence (4 pages)
- 204: Router Fence (4 pages)
- 210: Linear Router Fence Adjuster (4 pages)
- 8250K: Portable Router Table, Fence & Leg Set (3 pages)
- Mortising Plate & Hardware (2 pages)
- 360: Aluminum Table Stand (2 pages)
- 365: Router Table Cabinet (4 pages)
- 788XL: Dado Jig (8 pages)
- 789XL: Dado Jig (8 pages)
- 790XL: Dado Jig (8 pages)
- 7650: Small Half-Blind Router Table Dovetail Jig w/Bit (4 pages)
- 7600-7603: Dovetail Jigs (6 pages)
- 7600-7603: Dovetail Jigs (7 pages)
- 7640: Keller Dovetail Kit (2 pages)
- 6000: Horizontal Router Table (4 pages)
- 6002-6004: Horizontal Router Table with Angle-Ease (4 pages)
- 6010: HD Mortise Table (4 pages)
- 6011: Standard Mortise Table (4 pages)
- 6015-578DRO: Digital Readout Addon for 6000-6004 (2 pages)
- 577: Horizontal Router Table - Angle Ease (4 pages)
- 1470: Angle Ease for 3.5 Inch Router (4 pages)
- 1461-1463: Mini Angle Ease (4 pages)
- 1440-1441: Digital Readout Kit for EZ Lift (2 pages)
- 1435-6-7: EZ Lifts (4 pages)
- 4553: Box Joint Jig Upgrade Kit (3 pages)
- 4555: Box Joint Jig (4 pages)
- 4556: Portable Box Joint Jig (4 pages)
- 3220: Oval Jig (4 pages)
- 3230-3250: Oval Jigs (4 pages)
- 3260-3290: Large Circle Jigs (4 pages)
- 3000-3004: Planing Sleds (4 pages)
- 3010: Rail Kit (4 pages)
- 3400-3440: Scarfing Sleds (7 pages)
- 5434: Frame and Panel Master (4 pages)
- 5433: HD Rail Master (4 pages)
- 5432: HD Panel Master (4 pages)
- 524: Angled Coping Sled (4 pages)
- 526: Medium Coping Sled (4 pages)
- Standard (2 pages)
- Heavy Duty (1 page)
- 5301: 5" Plate Kit (2 pages)
- 5302: 5-1/2" Plate Kit (2 pages)
- 5350-5360: MDF Door Templates (2 pages)
- 786: Kurka Jig (8 pages)