Woodhaven 1435-6-7: EZ Lifts - Manual

Parts List:
Please identify and verify that you have all of the
parts listed and shown in the photos:
Part Description Quantity
1435 EZ Lift for 3-1/2” motors. . . . . . . . . . . . 1
Or
1436
EZ Lift for Porter Cable 7518 . . . . . . . . 1
Or
1437
EZ Lift for Milwaukee 5625 . . . . . . . . . 1
In addition to ONE of the EZ Lifts listed above, you
should also have the parts listed below.
Part Description Quantity
1435HX Crank Handle . . . . . . . . . . . . . . . . . . . . . 1
1435S 1/2” deep socket w/1/4” drive . . . . . . . 1
1435D Height Indicator . . . . . . . . . . . . . . . . . . . 1
140B Blank Insert . . . . . . . . . . . . . . . . . . . . . . . 1
140D 1-3/16” Insert . . . . . . . . . . . . . . . . . . . . . 1
140E 2” Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 1
101A Starting Pin . . . . . . . . . . . . . . . . . . . . . . . 1
140R O-Ring, pre-installed in plate . . . . . . . 1
1435, 1436 & 1437
EZ Lift
Owners Manual
Please Read Carefully!
BEFORE BEGINNING
Identify and verify that you have all the parts listed. Read the owners
manual at least once, familiarizing yourself with the EZ Lift before using.
The 1435, 1436 & 1437 EZ Lift is designed for tables with a 9-1/4"
x 11-3/4" plate opening. It is guaranteed square to the plate to within
1/4º and has 3-3/8" of fine adjustment, plus the coarse adjustment of
your router motor. There is no assembly needed, just remove your router
motor from its’ existing base and install it in the motor block of the EZ
Lift (see instructions). The EZ Lift will only fit the routers listed below:
Router Model Fits: 1435 EZ Lift 1436 EZ Lift 1437 EZ Lift
Porter Cable 7518 No Yes No
Milwaukee 5625 No No Yes
Porter Cable 892 Yes w/1436A w/1437A
Porter Cable 690 Yes w/1436A w/1437A
DeWalt 616/618 Yes w/1436A w/1437A
Bosch 1617/1618 Yes w/1436A w/1437A