Woodhaven 5301: 5" Plate Kit - Manual

ASSEMBLY
Remove your routers existing base
plate and attach the router plate (5300P)
in its place. There is a partially drilled hole
(H) in the router plate that is used to orient
it to select the mounting holes for the
plunge base of your Bosch 1617-18
(B), DeWalt 616-618 (D) or Porter
Cable 690-892 (PC) router. Use
the screws we supply (MF035,
MF054 or MF058) to mount
your router to the router plate.
We have an undrilled router
plate available (5300PD - not
shown) if you have a different
router you need to mount.
5301
Plate Kit
Please Read Carefully!
ing base
(5300P)
drilled hole
ed to orient
or the
-18
ter
Parts List:
Part Description Quantity
5301B 5" Base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
5300C Center Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
5300P Router Plate, pre-drilled . . . . . . . . . . . . . . . . . . . . . . . . 1
5300V Vac Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
MP150 1/4-20 x 1-1/2" screw . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
WS002 washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
HB020 1/4-20 x 3/4" bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PIN450 1/4" center pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
MF035 10-24 x 1/2" screw, Porter Cable, bagged . . . . . . . . 3
MF054 8-32 X 1/2" screw, DeWalt, bagged. . . . . . . . . . . . . . . 3
MF058 4mm x 12mm screw, Bosch, bagged . . . . . . . . . . . . . 3
2
PC
PC
PC
B
B
B
D
H
D
D
1
BEFORE BEGINNING
Identify and verify that you have all the parts
listed. Read thru the instructions at least once,
familiarizing yourself with the parts and process before
proceeding. You'll need a #3 Phillips screwdriver
and a 7/16" socket wrench for assembly.
The 5201 Plate Kit is
designed to work with the
5380K MDF Door Kit and
5320-5360 Templates.
Attach both vac outlets
(5300V) to the 5"
base using the 1-1/2"
screws (MP150).