Woodhaven 3010: Rail Kit User Manual

These five items bagged together, Please read carefully! additional hardware

These five items bagged together:

3010

48" Rail Kit

Owners Manual

Please Read Carefully!

Additional Hardware:

Parts listed below are not shown in the hardware

drawings. Refer to photos in the instructions:

Part Desc

. . . . . . . . . . . . . . . . . . . . . . . . Qty

4048

48" Double Track . . . . . . . . . . . . . . . . . . . . . . . . .2

3010A

48" Fence Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

3010B

48" Base Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

3010D

2-1/4" Double Track . . . . . . . . . . . . . . . . . . . . . . .4

4002

1-7/8" Double Track . . . . . . . . . . . . . . . . . . . . . .8

3010E

1/4" Shim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Part# Description Qty.
MF020 1-1/4"

screw 24

Part# Description Qty.
BUSH050 3/8” Spacer

Part# Description Qty.
5550S Knob

Part# Description Qty.
5760B Oval

Nut

Part# Description Qty.
MT010 1/2"

Screw 4

Part# Description

Qty.

STP004 1/2"

Screw

Part# Description Qty.
WB001 Washer

Part# Description Qty.
CAB010 Angle

Bracket 4

Part# Description Qty.
5750B Oval

Nut

BEFORE BEGINNING

Identify and verify that you have all the parts listed. The

48" Rail Kit is designed to be used with a Woodhaven Planing
Sled. The Rail Kit will reduce the width capacity of your Planing
Sled by 1-1/2". You can join multiple Rail Kits together end-to-
end to make the any length rail for the length of your work, as
long as you provide a flat surface for them to sit on.

The Rail Kit needs to sit on a flat surface or, when

multiple Rail Kits are used, be able to be shimmed so their they
are straight and on the same plane if a long flat surface is not
available. Get a 3020 Connector Kit for each Rail length you
want to add. The work must be 12-16" shorter than the overall
length of the Rail Kit(s). If you're using one 48" Rail Kit, the
work should be no longer than 36". If you're using two 48"
Rail Kits joined end-to-end, the work should be no longer than
84". You'll need a #2 & #3 Phillips screwdriver for assembly.
Read the instructions carefully at least once before beginning.

3010 Rail Kit with 3000 Planing Sled