Reflash computer, cont’d – Vortech 2005-2009 Ford 4.6L 3V Mustang GT User Manual

Page 43

P/N: 8N020-120

23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr

REFLASH COMPUTER, CONT’D

NOTE: Do not disturb the cable, or turn the ignition

off during this time. If the programming is dis-

rupted, the computer will not start or run your

vehicle!

Fig. 6-c

ESCAPE

ENTER

SELECT

ARROWKEYS

Select “Performance Tune” and press the enter

button in the middle of the arrow keys. (See Fig

6-c.)

Read the disclaimer entirely, then select agree

and press enter.

M. At this point please read the screen displayed on

the reflash tool. If you have any questions, either

refer to the manual that is provided with the

reflash tool or contact our service department for

further assistance.

Turn the ignition on (do not start the vehicle). Set

the parking brake and press the enter button to

continue.

SELECT TUNE will be displayed at the top of the

screen. Use the arrow keys to select the appropri-

ate tune for your vehicle and press the enter but-

ton. You will have a choice of four to choose from:

1. STD OUTPUT (non charge-cooled)
2. Charge-cooled, air/water (Choose this option)
3. Charge-cooled, air/air (this option is NOT

used in this application)

4. Original Backup

Continue to follow the screen and when finished

unplug the reflash tool from the vehicles OBD2

port.