Vortech 2005-2009 Ford 4.6L 3V Mustang GT User Manual

Page 24

P/N: 8N020-120

23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr

3B. WATER COOLER ASSEMBLY INSTALLATION, CONT’D

21. On the passenger’s side of the engine, attached

to the valve cover, is a large wire harness. The

harness will have to be relocated to gain clear-

ance for the surge tank and the radiator overflow

reservoir. (See Figs. 3B-n, 3B-m.)

22. Detach the wiring harness from the retaining clips

and move the harness to the shock tower. Secure

the harness to the A/C line with wire ties. (See

Fig.

3B-n.)

23. Remove the small clip retaining the small wiring

harness to the shock tower. (See Fig. 3B-n.)

24. Attach the small harness to the large harness with

wire ties.

25. To gain clearance for the coolant reservoir, the

A/C line will need to be bent slightly towards the

passenger’s side fender. (See Fig. 3B-n.)

NOTE: A/C line is under high pressure. Use caution

not to kink or damage the line.

(2005-2006 Only)
26. Remove the 10mm headed screw retaining the

ground strap to the bracket on the strut tower.

(See Fig. 3B-o.)

Fig. 3B-m

Fig. 3B-n

Fig. 3B-o

GROUND

STRAP

2005-2006

LOCATION

ONLY

SECURE

HARNESS

WITH WIRE-TIES

BENT

A/C LINE