Vortech 2005-2009 Ford 4.6L 3V Mustang GT User Manual

Page 33

P/N: 8N020-120

23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr

3E. ENGINE COOLANT RESERVOIR INSTALLATION (2007-2008 MODELS ONLY), CONT’D

Fig. 3E-i

Fig. 3E-h

Fig. 3E-j

TRIM FAN SHROUD AS

NEEDED

FOR HOSE CLEARANCE

Modify the small hose removed from the factory

coolant overflow reservoir. By cutting the "S” bend

off the hose end. (See Fig. 3E-h.)

10. Install a 3/8" union and a #17 stepless clamp.

Secure the clamp. Using a length of 3/8" (approxi-

mately 40" long) hose that is provided, secure the

hose to the union with a #17 stepless clamp.

(See Fig.

3E-i.)

11. Route the overflow hose across the radiator and

under the radiator retaining bracket to the

1/4"NPT x 3/8" hose barb fitting in the coolant res-

ervoir securing with a clamp. (See Fig. 3E-j.)