Vortech 2005-2009 Ford 4.6L 3V Mustang GT User Manual

Page 22

P/N: 8N020-120

23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr

3B. WATER COOLER ASSEMBLY INSTALLATION, CONT’D

Fig. 3B-j Viewed From Below

17. Locate the 3/4" x 150° molded rubber hose

(7U038-150). Connect the short end of the 3/4" x

150° hose to the lower port on the previously

installed water cooler. Install one of the provided

3/4" hose unions into the open end of the 150°

hose. Attach a length of 3/4" hose approximately

24" between tthe hose union and the previously

installed water pump discharge. Secure all hose

connections using the nylon ratchet clamps pro-

vided. (See Fig. 3B-j.)

18. Attach a length of 3/4" hose approximatelly 48"

long to the previously installed water pump feed

port and secure. Route the open end of the

installed hose toward the passenger’s side shock

tower. This hose will be connnected in later step.

(See Fig. 3B-h.)

WATER COOLER

HOSE TO

WATER

PUMP

3/4" x 150°

HOSE (7U038-

150)

3/4" HOSE

UNION

FRONT OF VEHICLE

NOTE: The installation of this hose section should

maintain an “uphill” routing wthout dips or

kinks.