SurgeX SX-AX20E - Manual (Page 33)

© SurgeX | Technical Support: 800-645-9721 | surgex.com
Axess Elite User Manual
Firmware Version v1.06.227
tAuxCommand
typedef struct {
char relay; //A or B eAuxStatus; //N or F
}tAuxCommand;
tInformManualControl
typedef struct{
unsigned char outlet; //id of outlet
to change unsigned char status;
//the state
to change to
}tInformManualControl;
tInformOverVoltage
typ
ed
ef
str
uct
{
flo
at
vol
tag
e;
}tInformOverVoltage;
tInformUnderVoltage
typ
ed
ef
str
uct
{
flo
at
vol
tag
e;
}tInformUnderVoltage;
typ
ed
ef
str
uct
{
flo
at
cur
re
nt;
}tInformOverCurrent;
tInformOverTemperature
type
def
stru
ct{
int
tem
pera
ture;
}tInformOverTemperature;
10. Device Management Utility
1. New DMU version is v1.30.11
2. Upgraded version of DMU currently in use with Axess Ready products.
3. Windows software utility which provides network discovery, setting of IP Address, and Factory Default Reset functions,
now for Axess Elite running version 2.04.281 and higher in addition to Axess Ready.
Using the Web interface: Navigate to Setup/Device, check the box beside “Allow Firmware Upgrade”, press the “Save”
button at the bottom of the page, and then reboot the unit by pressing the “Reboot Required” button at the bottom of the
page.