SurgeX SX-AX20E - Manual (Page 10)

© 2015 SurgeX/Electronic Systems Protection, Inc. | Technical Support: 800-645-9721 | surgex.com
Axess Elite User Manual
Firmware Version v1.06.227
5. Web Server
The web server is built around 4 pages: Login, Device View, Global View, and Setup. Each page is discussed in
detail below.
5.1 Login
The Login page is the first page displayed when
a web browser makes a connection to the
Axess Elite. Enter a valid user name and
password in the “User Name” and “Password”
fields, and press “Login” to log in to the Axess
Elite.
A mobile login page is available at
IPAddress/mobile_login.html
5.2 Administration
5.2.1 Reset Factory Defaults
• Allows resetting of factory defaults from the web interface.
• Options to keep or reset network IP settings.
• Options to keep or reset calibration data.
5.2.2 Backup/Restore
• Provides Configuration Management via *.conf files.
• Backup current configuration to file.
• Restore configuration from previously saved file.
- Option to keep current network IP settings or use those in configuration file.
- Option to keep current calibration data or use calibration values in configuration file.
· If restoring the calibration values stored in a configuration file, there is an option to only
restore the values if the MAC address of the unit and the MAC address in the configuration
file match.
5.2.3 System Info
• Displays number of logged in web users, time each user has been logged in, and System uptime.
Also provides a Reboot button
9