SurgeX CM-1115-RT-AR - Manual (Page 25)

CM-1115(20)-RT-AR User Manual Page 24
VIII. DxP Protocol
(continued)
Commands
There are currently 7 command classes. All classes are defined in the C programming enumerated
type definition below:
typedef enum {
eCmnd_null,
eCmnd_set,
eCmnd_get,
eCmnd_io,
eCmnd_keepAlive,
eCmnd_rss,
eCmnd_rcu
} eCmnd;
Command Description
0 eCmnd_null This is a null command and should not be sent to the server.
1 eCmnd_set This command is used to set programmable variables on the server.
2 eCmnd_get This command is used to get programmable variables from the
server.
3 eCmnd_io This command is used to monitor and control the I/O on the server.
4 eCmnd_keepAlive This command is sent to the server as a means of allowing the
client to validate the communications path to the server.
5 eCmnd_rss This command class is used to control the RSS nest using the RCU.
Note: Project specific command. Not for general use.
6 eCmnd_rcu This command class is used to update the display of the RCU.
Note: Project specific command. Not for general use.