SurgeX CM-1115-RT-AR - Manual (Page 22)

CM-1115(20)-RT-AR User Manual
Page 21
VII. Command Line Interface (CLI) Protocol
(continued)
Event Commands
Command Description Admin Fact Def
get events Returns all scheduled events currently in use. Example:
Date Time Repeats
Action
1. 12/22/2011 14:00 every 2 Hour(s) Cycle
2.
every 0 Day(s) On
3. every 0 Day(s) On
4. every 0 Day(s) On
5. every 0 Day(s) On
6. every 0 Day(s) On
7. every 0 Day(s) On
8. every 0 Day(s) On
No
get time Returns the current time and time server. Example:
Current Time: 10:14:17 12/20/2011
Server: 10.1.2.12
No
set time server < dotted decimal > Sets the IP address of a Network Time Server. Yes 64.90.182.55
set time enable < yes | no > Enables or disables the use of a time server and scheduled
t
Yes No
set event < 1-8 > date < mm/dd/yyyy > Sets the scheduled event’s starting date. Yes
set event < 1-8 > time < hh:mm:ss > Sets the time the scheduled event will occur in 24 hour format. Yes
set event < 1-8 > repeat < day | hour | minute
> Sets the repetition interval type for the selected event. Yes
set event < 1-8 > mult < 0-999 > Sets the number of repetition intervals for the selected event. For
example, 20 days, 30 minutes, 24 hours, etc. Yes
set event < 1-8 > action < on | off | cycle > Sets the action to be performed at the scheduled time. Yes
del event < 1-8 > Deletes the scheduled event. Yes