SurgeX CM-1115-RT-AR - Manual (Page 13)

CM-1115(20)-RT-AR User Manual
Page 12
VI. Web Server
(continued)
Setup Pages
Setup pages are only available while logged in with Administrator credentials. Press Save to save
the new settings. If the new settings require the AR to be rebooted, a Reboot button will appear at
the bottom of the page. Settings requiring reboot will not take effect until the unit is rebooted.
Device
• Location ID: Specifies a name label (up to 20 characters) that will be displayed at the top
of all pages. Assigning unique names is helpful for management of multiple units.
• Cycle Time: Specifies the length in seconds of a power cycle (1-999 seconds).
This is the amount of time the outlet will temporarily be On or Off, depending on the initial
outlet state.
• Upgrade Enable: Enables the ability to upgrade the firmware of the AR.
• Auto Logout: Specifies the inactivity timer duration in minutes (0-99 minutes). If there is no
activity after the specified amount of time, the user will be automatically logged out. Setting
the timer duration to 0 disables the timeout feature.
Important: As the AR allows only one web user logged in at any time, use caution
when disabling the timeout feature, as it is possible to lock out other users by
forgetting to log out. Closing the web browser will not log the user out, and will
lock out web access. In this situation it will be necessary to access the AR via
telnet and reboot the unit.