Spectrum Controls 1734sc-OE2CIH - Manual (Page 34)

3-10 Chapter 3: Configuring the Module
User’s Manual Pub. 0300272-01 Rev. A.0
The New Module dialog appears:
View or specify the following options:

Name. Enter name of new module.

Description . If needed, enter a description for the module.

Comm Format . Select the communication format. When you select a
communication format, you are also selecting the configuration formats
for the module. For an OE2CIH module, select Data – INT.

Slot . Enter the slot number in which the module resides.

Connection Parameters . For the OE2CIH module, use the following
parameters:
-
Input. Enter 101 for the Assembly Instance. Enter 28 for the
Size.
-
Output. Enter 102 for the Assembly Instance. Enter 3 for the
Size.
-
Configuration. Enter 225 for the Assembly Instance. Enter 40
for the Size.
The Module Properties Connection tab appears. Make any
changes necessary, and then click OK to exit the window.