Spectrum Controls 1769sc-IR6I - Manual (Page 10)

1-2 Compact™ IO Isolated RTD/Resistance Module
User’s Manual Pub. 0300241-01 Rev. A
1.1.1 RTD/Resistance Inputs and Ranges
The table below lists the RTD and resistance types and their associated full-scale ranges,
supported by the IR6I module.
Input Type
Input Range
˚ Celsius ˚ Fahrenheit
Pt 385 -200 to +850 -328 to 1562
Pt 3916 -200 to +630 -328 to 1166
10 Cu 426 -100 to +260 -148 to 500
100 Ni 618 -100 to +260 -148 to 500
120 Ni 672 -80 to +260 -112 to 500
604 NiFe 518 -100 to +200 -148 to 392
150 ohm 0 to +1500 1
500 ohm 0 to +500 1
1000 ohm 0 to +1000 1
3000 ohm 0 to +3000 1
1.1.2 Data Formats
The data can be configured on board each module as:
•
Engineering units x 1
•
Engineering units x 10
•
Scaled-for-PID
•
Percent of full-scale
•
Raw/proportional data
1.1.3 Filter Frequencies
The module uses a digital filter that provides high frequency noise rejection for the input
signals. The filter is programmable, allowing you to select from six different filter
frequencies for each channel:
•
4.17 Hz
•
10 Hz
•
16.7 Hz
•
19.6 Hz
•
62 Hz
•
470 Hz