Rocktron Prophesy II - Manual (Page 86)

86
Dumping and Loading Prophesy Data
Any or all of the Prophesy presets can be dumped to a sequencer or another Proph-
esy via system exclusive messages. The information exchanged when performing a MIDI
dump or load consists of parameter values, title characters and controller assignment/
limit information. When dumping a single preset into another Prophesy, the dumped
preset can be loaded into any preset location on the receiving unit.
Dumping a single Prophesy preset into another Prophesy
———————————————————————————————————————————————————
1 Connect a standard MIDI cable from the MIDI OUT of the transmitting
Prophesy to the MIDI IN of the receiving Prophesy, as shown below.
Important
Do not allow a looping
connection from the MIDI
OUT/THRU of the receiving
Prophesy back to the MIDI
IN of the transmitting
Prophesy when performing a
preset dump. Only use the
connections shown at right
when dumping data from one
Prophesy to another.
!
———————————————————————————————————————————————————
2 On the transmitting Prophesy, use the PAGE control to select the preset
to be dumped to another Prophesy.