Rocktron Prophesy II - Manual (Page 76)

76
———————————————————————————————————————————————————
9 Set up the ADSR page for the preset
Use the PAGE control to access the next page, which displays the
ADSR parameters.
———————————————————————————————————————————————————
10 Use the GAIN control to set the ADSR function " ON ".
———————————————————————————————————————————————————
11 Use the BASS control to set the ATTACK parameter, which determines
the amount of time in which the WAH FRQ parameter will reach its
maximum value (or the upper limit value set in the controller page, if
set) after a note is plucked.
———————————————————————————————————————————————————
12 Use the MID control to set the DECAY parameter, which determines the
amount of time in which the WAH FRQ parameter will go from its
maximum value to the value defined by the S-LVL (Sustain Level)
parameter.
G
The Input Meter
and ADSR
When the ADSR page is
displayed, the front panel
Input meter changes
functions and instead
displays ADSR levels.
When a note is plucked, the
Input meter will display, in
the following order:
1. the initial attack
2. the decay down to the
S-LVL value
3. holding at the S-LVL
value for S-TIME
4. the release
ADSR
ON
ATTACK
19
DEC
0
S-TIME
0
S-LVL
0
R-TIME
0
ADSR
ON
ATTACK
19
DEC
53
S-TIME
0
S-LVL
0
R-TIME
0
ADSR
ON
ATTACK
0
DEC
0
S-TIME
0
S-LVL
0
R-TIME
0
ADSR
OFF
ATTACK
0
DEC
0
S-TIME
0
S-LVL
0
R-TIME
0