Rocktron Prophesy II - Manual (Page 30)

3 0
Preamp Page 2: Channel/Voicing
122 CHANNEL VOICING TYPE
1 <--CLEAN AMERICAN
D
ESCRIPTION
The CHANNEL parameter allows you to select any of the four preamp
channels (1-4) for the current preset. The name of each channel is displayed
under the VOICING TYPE heading when selected. Available preamp
channels are Clean American, Texas Blues, Vintage British and Mega Drive.
The V-CN parameter defines a dedicated MIDI controller number for the
Prophesy's volume. A MIDI expression pedal can be configured to match
this number and act as a volume pedal. (0-120)
The RUN STAT parameter determines the current running status of the
volume pedal. If this parameter is set to "
ON " and a preset is recalled, the
Prophesy will set the volume of the recalled preset to the last value it had
received from the volume pedal. When set to "
OFF ", the Prophesy will recall
the stored preset volume regardless of the current volume pedal position.
Once a preset has been recalled, the volume pedal can be used to change the
volume.
The V-PED parameter displays the volume that will be used when the preset
is recalled and the RUN STAT parameter is set to "
OFF ".
P
ARAMETER
CHANNEL
V-CN
RUN STAT
V-PED
Preamp Page 2 parameters
V-PED
127
RUN STAT
OFF
V-CN
17
Preamp Page 3: Pre EQ
The PRE EQ pages allow you to shape the tone prior to the distortion stage.
Considerable tone variations can be achieved by modifying these pre-distort EQ
parameters.
122 PRELF
+ 1.5
PRELFF
101Hz
PREMF
+ 7.0
PREMFF ->
1414Hz
B W
1 . 7
BRIGHT
OFF