Rocktron Prophesy II - Manual (Page 43)

4 3
PITCH SHIFT Pages
Pitch Shifting is used to change the pitch of the input signal to produce a harmony
note based on the input signal. The Prophesy allows for 2 harmony voices to be defined
for each preset. Each harmony voice can be of any fixed interval—up to one octave
above the input signal to two octaves below—and is selected in 20-cent increments.
Fine adjustment can be made in one cent (1/ 100th semitone) increments.
Pitch Shift Page 1: Voice 1
122
D
ESCRIPTION
The PITCH parameter selects what harmony note the Prophesy will produce
based on the input note. The value displayed for this parameter represents the
number of cents that the signal will be shifted (adjustable in 20-cent increments).
Each 100 cents (or five 20-cent steps) above or below “0” represents the number
of half-steps the shifted signal will be from the input signal.
This parameter is adjustable from -2400 to +1200, where -2400 = two octaves
below the input signal, 0 = unison and +1200 = one octave above the input signal.
Refer to the table below to determine the cent value for each fixed interval.
The FINE parameter allows for adjustment in 1-cent steps for fine adjustment of
the harmony note. (-20 to +20)
The LEVEL parameter determines the volume of the pitch shifted signal relative to
the other signals. (Off, -42.0 to +6.0)
The PAN parameter allows you to pan the shifted signal to the left or right
channel. (Left to Right)
P
ARAMETER
PITCH 1 and 2
FINE 1 and 2
LEVEL 1 and 2
PAN 1 and 2
Pitch Shift Page 1 and 2 parameters
PITCH 1
+500
FINE 1
+12
LEVEL 1
+2.5
PSHIFT> PAN 1
79>R