Palram PALGAR - Manual (Page 6)

PALSUN® PALGARD™
Glazing Guide
6
4. Polycarbonate General Characteristics & Physical Properties:
Table 4: Typical Properties of PALSUN, PALTOUGH & PALGARD Sheet (3 mm = 0.12 in.)
Notes:
1. Conditions, units and values in the table, in U.S. Customary units, are presented within brackets.
2. Results depicted in this table were obtained by following indicated ASTM method, except where another method is
indicated by a (b) symbol.
3. All 3 sheet types are basically polycarbonate, with identical properties, save additional thin UV protective layer(s) or the
ultra-thin silica (abrasion resistant) coat(s) and their contribution to the specific sheet behavior.
4. Test results depicted correlate (when applicable) to a 3.0mm (1/8 in.) thick sheet.