Palram PALGAR - Manual (Page 4)

PALSUN® PALGARD™
Glazing Guide
4
2. PALSUN Family:
Table 1. PALSUN Family – Description & Indications for Use
Ser.
No. Type & Name of
Product
Description
Comments & Indications
for Use
A B C d
1 PALTOUGH
UV stabilized sheet, smooth on both
sides
For indoor applications only. Available also
in other configurations as appears in
paragraph 4, 5 & 6 in the table.
2 PALSUN
Sheet smooth on both sides, with
integral co-extruded UV protective layer
on its external side. Applied on exterior wall windows, curtain-
walls, skylights & sidelights or internal
artificial lighting elements
3 PALSUN plus
Sheet smooth on both sides, with
integral co-extruded UV protective
layers on both sides.
To be applied in open outdoors glazing,
with possible UV exposure on both sides
(sound barrier for instance) & external
artificial lighting elements
4
PALSUN
Embossed
Sheet embossed on one side, with
integral co-extruded UV protective layer
on the external smooth side, unless
otherwise required
Possible UV protective layers on both sides.
3 possible embossing shapes: “hill & valley”,
“Prismatic”, “Hair-Cell”
5 PALSUN Matte
Finish Sheet smooth on one side, with anti-
glare matte finish for better light
diffusion, on the other With integral co-extruded UV protective
layer on the external side or on both.
6 PALSUN FR An high fire resistance sheet,
conforming to US Fire Standard UL 94
V-0 With integral co-extruded UV protective
layer on the external side or on both.
Available in all possible combinations
appearing in this table.
7
PALSUN
Solar-Control
A tinted, metallic hued, semi-reflective
sheet with integral solar-radiation
control enabling regulated transmission
of visible light with reflectance of most
solar longer wave heat radiation
With integral co-extruded UV protective
layer on the external side or on both.
Available in aluminum shade (gray) & Solar
Ice (pearly -white). Other hues & colors on
special demand subject to minimal quantity
order.
8 PALSUN Mirror
Sheet smooth on both sides, with
integral co-extruded UV protective layer
on its external side & mirror metallic
coated film on the other . For indoor & outdoor applications. Internal
mirror finish film will always be installed
against a rigid, sealed backup or other
sealed, impermeable protective element.
9 PALGARD Clear
A colorless transparent sheet, smooth
on both sides, with integral co-extruded
UV protective layer on the external side
(or both) & abrasion resistant silica coat
on one side (generally external) or both.
Other tints (bronze, gray etc.) at 5%
surcharge & 5.0 t min. order. To be used
same as flat PALSUN glazing (and variants)
with enhanced cleaning options & improved
scratch resistance
To be installed in the flat position only.
10
PALGARD
Translucent Same as PALGARD Clear but in special-
order translucent version. Non-standard. Available At special order, min. 5 t.
per order /color + agreed surcharge
Notes:
1. all PALSUN & PALGARD sheets appearing in the table are produced with polyethylene protective masking on
both sides of the sheet (or on one side on special order). The UV protected side (and the silica coated side on
PALGARD) is clearly marked on the appropriate protective film. The masking would be peeled-off only during
actual installation or immediately after its conclusion.
2. For instructions on transportation, handling & storage see relevant sections further on in this manual.
3. PALSUN & PALGARD sheets carry 10 years limited guaranty, as appears in PALRAM Guaranty Certificate, provided on
demand.
4. PALSUN & PALGARD sheets can be supplied as transparent, translucent or opaque configurations, in a few standard
sizes, colors & tints, thickness & light-transmission. Non-standards properties upon special demand, subject to minimal
order & agreed surcharge. For more details contact local PALRAM dealer.