Nor-Cal IQ+ Adaptive Pressure Controller - Manual (Page 35)

Call toll free 800-84-4166 or 530-842-4457 • FAX 530-842-9130
I
ntellIsys
A
dAptIve
p
ressure
C
ontrollers
IQ+ OP-LIT 9/08
Power SuPPly Part numBer
IQ+ Power Supply Part number pending, call representative for information
model Number matrix for Adaptive Pressure Controllers IQ+
Use the model number tree at right with the matrix below to define
a valid Nor-Cal Products adaptive pressure controller model number.
Choose one option from each column.
valve tyPe uSer InterFace InPut voltaGe communIcatIonS oPtIonS
1 = Geared Throttling Buterfly Valve or
Universal Valve Drive (TBV or UVD)
00 = Standard. Buried Box
(limited switches & LEDs)
A = RS-232 + Analog/TTL blank = None
2 = Direct Drive Throttling Buterfly Valve
(TBV)
L = 24 VDC differential R = RS-485 + Analog/TTL b = Battery backup
3 = Geared Drive Sealing Throttling
Buterfly Valves (TBVS)
D = RS-232 + DeviceNet 2 G = Gauge Power Supply
7 = Throttling Soft-Shut Valve (TSS) E = Ethernet
Sxx = Customer specific
model, xx = 01, 02, etc. y
8 = Throttling Pendulum Valve (TPV)
APPENDIx I – Spare Parts and Ordering Information
To make the completion of an Intellisys downstream pressure control system easy, Nor-Cal Products offers a comprehensive selection of cables and related accessories. These include signal
and communications cables, power cords, power supplies as well as spare parts.
Power cordS dIaGram # lenGth deScrIPtIon
CRD-PWR-US1 1 7’ 10A-125V rated appliance cable.
CRD-PWR-US2 2 7’ 10A-250V rated appliance cable.
CRD-PWR-UK 3 7’ 10A-250V rated appliance cable. For use in the UK
CRD-PWR-EU 4 7’ 10A-250V rated appliance cable. For use in Continental Europe
SerIal caBleS lenGth deScrIPtIon
IQ-CRD-RS232-10 10’ Connects any DC powered IQ+ to a standard PC or laptop DB-9 serial port
GauGe caBleS lenGth deScrIPtIon
CDG-IQ-CRD-10 10’ DC powered APC-to-gauge cable, where gauge has 5-pole terminal block
CDG-IQ-CRD-DB9-10 10’ DC powered APC-to-gauge cable, where gauge has DB-9 plug connector
CDG-IQ-CRD-DB15-10 10’ DC powered APC-to-gauge cable, where gauge has DB-15 plug connector
CDG-IQ-CRD-Y 1’
Y-cable to be used with DC powered APCs when two-gauge connection is
required. Use of this Y-cable also requires the use of CDG-CRD-10, CDG-CRD-
DB9-10 or CDG-CRD-DB15-10 cables.
valve caBle lenGth deScrIPtIon
TBV-CRD-10 10’ APC-to-Valve cable
Battery Back-uP SPare Part numBer
IQ+ replacement battery Part number pending, call representative for information
Controller Cables and Accessories
Most cable and cord part numbers listed below end with the number 10 as a suffix, which represents the cable length, measured in feet. Thus, Nor-Cal’s standard cable length is 10’
(3m). However, any length between 1’ (0.3m) and 30’ (9.1m) can be supplied as a special request. Please contact Nor-Cal Products for price and availability information.
APC -PSm-Db15 Power Supply
Diagram 1 Diagram 2
Diagram 3 Diagram 4 AC Power Cord Plug Configurations
I
ntellIsys
A
dAptIve
p
ressure
C
ontrollers
IQ+ OP-LIT 9/08
Bqc
Valve Type User Interface Input Voltage Battery
Backup
Comm. Type Gauge Power
Supply
GauGe Power SuPPly Part numBer
TBD Part number pending, call representative for information